-同步焊接控制
-多功能,易于操作的微电脑控制
-10条焊接时间表
-2脉冲焊接计划
-上下坡
-9999焊接计数器
-2压力阀输出
-2启动输入
-4操作
现货,双头头,缝焊机兼容



Specification

ModelSK-24V, SK-24H
Welding power200~240VAC and 380~480VAC
Control power100~240VAC (Free voltage)
Frequency50Hz/60Hz
Memory retention10 years and over after power failure
Indication7-segment LED Display
External input
(Dry contact or open collector)
Mode switch 1, Mode switch 2
Start 1, Start 2
Thermo switch
Pressure valve outputValve 1, Valve 2
Control voltage output
Weld end outputOne short(0.3sec)
Weld currentControl methode : Phase control by thyristor
Control angle : 20 to 160
Maximum analyze : 0.1% to 140 (0.14)
Weld counter0..9999 counts
Program parametersSchedule0..9 schedules
Squeeze0..99 cycles
Up slope0..9 cycles
Weld 10..99 cycles
Cool 10..9 cycles
Weld 20..99 cycles
Down slope0..9 cycles
Cool 20..99 cycles
Off
Current 10.0 to 99.9%
Current 2
Power consumptionControl power _ 12W Max. (Excluding valve output)
Ambient temperature-10 to 55℃ (at non-freezing status)
Storage temperature-25 to 65℃ (at non-freezing status)
Ambient humidity35% to 85% RH
Insulation resistanceMin. 100MΩ (at500VDC)
Dielectric strength200VAC 50/60Hz for 1 minute
Noise strength±2kV the square wave noise
(pulse width:1㎲ by the noise simulator)
DimensionsSK-24V85mm(W)×260mm(H)×207mm(D) /
3.3"(W) x 10.2"(H) x 8.1"(D)
SK-24H260mm(W)×85mm(H)×207mm(D) /
10.2"(W) x 3.3"(H) x 8.1"(D)
你对SK24有任何疑问吗?