同步焊接控制 SK24
– 同步焊接控制
– 多功能，易于操作的微电脑控制
– 10条焊接时间表
– 2脉冲焊接计划
– 上下坡
– 9999焊接计数器
– 2压力阀输出
– 2启动输入
– 4操作
现货，双头头，缝焊机兼容
Specification
| Model | SK-24V, SK-24H |
|---|---|
| Welding power | 220VAC and 380~480VAC |
| Control power | 100~240VAC (Free voltage) |
| Frequency | 50Hz/60Hz |
| Memory retention | 10 years and over after power failure |
| Indication | 7-segment LED Display |
| External input (Dry contact or open collector) | Mode switch 1, Mode switch 2 Start 1, Start 2 Thermo switch |
| Pressure valve output | Valve 1, Valve 2 Control voltage output |
| Weld end output | One short(0.3sec) |
| Weld current | Control methode : Phase control by thyristor Control angle : 20~160 Maximum analyze : 0.1% to 140 (0.14) 0~9999 counts |
| Weld counter | 0~9999 counts |
| Program parameters Schedule | 0~9 schedules |
| Squeeze | 0~99 cycles |
| Up slope | 0~9 cycles |
| Weld 1 | 0~99 cycles |
| Cool 1 | 0~9 cycles |
| Weld 2 | 0~99 cycles |
| Down slope | 0~9 cycles |
| Cool 2 Off | 0~99 cycles |
| Current 1 Current 2 | 0~99 cycles |
| Power consumption | Control power _ 12W Max. (Excluding valve output) |
| Ambient temperature | -10 to 55℃ (at non-freezing status) |
| Storage temperature | -25 to 65℃ (at non-freezing status) |
| Ambient humidity | 35% to 85% RH |
| Insulation resistance | Min. 100MΩ (at500VDC) |
| Dielectric strength | 2000VAC 50/60Hz for 1 minute |
| Noise strength | ±2kV the square wave noise (pulse width:1㎲ by the noise simulator) |
| Dimensions SK-24V | 85mm(W)×260mm(H)×207mm(D) / 3.3"(W) x 10.2"(H) x 8.1"(D) |
| SK-24H | 260mm(W)×85mm(H)×207mm(D) / 10.2"(W) x 3.3"(H) x 8.1"(D) |
你对SK24有任何疑问吗？